Sonderverwaltungsregion Hongkong
USD
$
Laser cleaning machines offer a fast, non-contact cleaning solution for metal sheets and welds, including carbon steel, stainless steel, and aluminum. They easily remove rust, oil, scale, and weld discoloration, improving weld quality without damaging the substrate.
The laser beam targets only surface contaminants. It vaporizes rust and oil instantly without reducing plate thickness.
By scanning the metal weld with a laser gun, rust or oil stains on the weld surface can be removed within seconds, restoring the original metallic appearance.
Runs on standard electricity with zero consumables. No dust, no chemical waste, and low maintenance costs.
Not sure whether pulsed laser cleaning fits your material?
Request an Application Recommendation
HANTENCNC GLOBAL CO., LIMITED, 1008 Tai Nan West Street, Room 22, 11/F, China United Plaza, Sham Shui Po District,
| Comparison | HANTENCNC Laser | Grinding | Acid Pickling | Sand Blasting |
|---|---|---|---|---|
| Base Metal Protection | Zero Damage | Scratches & Thins | Corrosion risk | Warping & Grit |
| Cleaning Speed | Fast | Slow | Slow | Medium |
| Consumables Cost | Electricity Only | High (Discs) | High (Chemicals) | High (Sand/Grit) |
| Eco & Safety | Clean & Less Smoking | Dusty & Noisy | Toxic & Hazardous | Dusty & Loud |
| Flexibility | High (Local Clean) | Poor in Gaps | Hard to Move | Stationary |
Tell us if you work with carbon steel, stainless steel, or aluminum, and whether you need pre-weld prep or post-weld cleaning.
Heavy hot-rolled plates require higher power, while thin sheets need precise low power.
Continuous-wave (CW) is best for heavy rust and large areas. Pulsed lasers are best for thin sheets and precision work.
Please provide your metal; our engineers will test it and recommend the most suitable equipment configuration for your needs.
Suitable for: Fine cleaning of metal surfaces for oil stains, oxides, and welds.
No damage to the substrate.
Suitable for: Large-area rust removal, thick iron oxide scale removal, and weld cleaning.High speed and cost-effectiveness.
It includes four functions: cleaning, cutting, welding, and cleaning weld seams.
Contact HANTENCNC today for expert machine selection and free sample testing.
Ensure the laser only removes surface dirt. The underlying metal reflects the beam, keeping plates safe and unthinned.
Yes. Removing oil, rust, and scale completely stops weld porosity. A clean metal surface ensures a stable arc and stronger welds.
Very easy. The system features a simple touch screen. Workers can learn to operate it safely within 10 to 15 minutes.
Laser cleaning operates entirely on electrical power. It only requires periodic replacement of the protective lens, eliminating the need for frequent replacement of grinding wheels, chemicals, or abrasive blasting media.
Send us your metal samples. Our engineers will run free tests, record process videos, and recommend the exact wattage for your shop.
Yes. Operators only need to wear standard protective eyewear. The machine is CE and FDA certified, so it can be used with confidence.
Up to 100,000 hours. Our high-quality fiber laser sources are designed for long-term industrial use with virtually zero maintenance required for the core optics.
Usually 3 to 6 months. By eliminating consumable costs (grinding wheels, chemical agents) and reducing labor time by up to 70%, most fabrication shops recover their initial equipment investment very quickly.
Contact us directly : WhatsApp / Phone: +8619560643839
Email: support@hantenlaser.com
